BIS Certification for Room Heaters IS 302 Part 2 Section 30
Category: BIS Certification
Are you a manufacturer or an importer of Room Heaters in India? If yes, then you’re likely aware of BIS Certification. The Bureau of Indian Standards (BIS) has made ISI/BIS Certification mandatory as per IS 302 (Part 2/Sec 30) to comply with safety regulations for domestic electrical appliances and to provide protection from electric shock, fire risk, and overheating.
An Electric Room Heater (also known as a Radiant Electric Room Heater) is one of the most efficient and convenient heating options for your house. It uses a thermodynamic liquid, such as oil, to convert electrical energy into heat. Each Electric Room Heater has a built-in thermostat that regulates the amount of energy needed to keep the room at its desired temperature.
The ISI Mark establishes both the safety and quality criteria for the entire manufacturing process. For the BIS certification process, compliance with BIS-approved independent labs and factory inspection is mandated.
Overview of Room Heaters under BIS Schem-I
Room Heaters are widely used in Indian households to provide warmth and maintain a comfortable indoor temperature during cold weather. They utilize thermodynamic fluid, such as oil, to convert electrical energy into heat. Each electric radiator is equipped with a thermostat that regulates the energy required to maintain the desired room temperature.
Room heaters are covered under IS 302 (Part 2/Sec 30), which outlines the safety requirements. The ISI Mark Certification guarantees quality, reliability, and safety. This can help to get the consumers' trust, as the product they are purchasing adheres to regulations.
Key Highlights for Room Heaters IS 302 (Part 2/Sec 30)
Here are the key things to know about Electric Room Heaters according to IS 302 (Part2/Sec 30):
- Covered Products: Electric Room Heaters that are rated as being 250V (Single Phase Only) OR 415V, including: Convection Heaters, Fan Over Heater & Oil-Filled Radiators.
- Mandatory Requirements: Certification is verification of conformity to the Electrical Safety Standards applicable to the product.
- Safety and Testing: Concerned with basic safety and testing requirements for Electric Room Heaters, such as insulation, protection from access to live parts of the heater, and the Materials’ ability to withstand Heat and fire.
- Performance Testing: Includes a test for Earth Continuity, Earth, and Insulation Leakage Current, and the Electrical Strength of the radiator body at the Ongoing Test Temperature.
- Construction and Stability: Requires materials to be manufactured to a High Standard to achieve Strong Construction, preventing Mechanical Hazards, which cause instability during use.
- Overheat Protection: Establishes strict requirements for the Thermal Cut-Out to prevent Heating, thereby decreasing the likelihood of injury or harm to persons and/or property due to Heat, mechanical, or Electrical Shock Hazards.
Benefits of BIS Certification for Room Heaters
ISI Certification India of Room Heaters provides several advantages, including fire and Electric shock protection, helps to boost consumers' trust, and more, such as:
- Compulsory Certification: ISI Marks must be obtained before manufacturing, importing, or selling an electric heater for home usage or an electric heater for commercial usage in India. If not obtained, you could face large amounts of fines or have your product seized.
- Strengthened Consumer Protection: Electric heaters bearing certified ISI Marks must meet IS 302 (Indian Standard) for electrical appliances, thermal stability of a heater, and the electrical insulation of a heater.
- Consumers' confidence & Brand Value: The ISI mark provides a quality assurance symbol to build consumer confidence in your product and will lead to your obtaining improved market share and increased sales from enhanced consumer confidence.
- Product Differentiation & Advantages: Products that carry ISI Marks will stand out due to their increased safety and more reliable quality, giving manufacturers a competitive advantage over non-certified manufacturers.
- Quality Control Management: Manufacturers' products will be subjected to periodic audits by the Bureau of Indian Standards (BIS), ensuring that their manufacturing process consistently produces quality products
Documents required for ISI Mark on IS 302 (Part 2/Sec 30)
There is a list of important documents given below that you must have for obtaining BIS Certification on Room Heaters:
- Business Registration Documents (Company Incorporation Certificate / GST Registration)
- List of Manufacturing Machinery and Testing Equipment
- Factory Layout Plan showing production and testing areas
- Authorized Signatory ID and Authorization Letter
- Quality Control Documents and inspection procedures
- Trademark Authorization Letter (if the brand owner is different from the manufacturer)
- Manufacturing Unit Details and factory address proof
- Product Technical Specifications and design details
- Manufacturing Process Flow Chart
- In-house Test Report or Product Test Report from a BIS-recognized laboratory
Applicable Test Parameters for Room Heaters IS 302 (Part 2/Sec 30)
Applicable test parameters for room heaters under IS 302 (Part 2/Sec 30) ensure safety, focusing on electrical protection, mechanical strength, and fire resistance.
- The tests help to ensure that the product get protect acgainst the live parts, ensuring no user contact with electrified components.
- Input power and current tests ensure that the device is within the rated input power and current.
- Test for leakage current and lost electric strength at operating temperature.
- Performance test to ensure the heater does not produce excessive heat.
- Stability and physical hazards tests make sure that the heater cannot easily tip over on an incline of 10 degrees.
- The heaters are combined by Wattage (i.e., group I, up to 1000 W; group II, over 1000 W).
Process of BIS Certification of IS 302 (Part 2/Sec 30)
To obtain BIS certification, a manufacturer must complete a few steps, such as:
- File an Application: Before applying for a manufacturing licence, the manufacturer must first sign in and register on the BIS website.
- Compile Documents: Once registered, the manufacturer will begin compiling the necessary documentation for their application (quality control certificates, factory licence, etc.) to submit to the BIS.
- Testing in Laboratories: The manufacturer must provide stability samples of their product to the BIS-approved laboratory for chemical testing of all the components.
- Inspection of the Manufacturing Process: The manufacturer will then go through a complete inspection of their manufacturing process (physical layout of plant and production), including quality control at the time of production.
- Issuance of the Licence: Once the manufacturer completes both laboratory testing and inspection of the manufacturing process, they will receive their manufacturing licence from the BIS and be allowed to place the Standard Mark on their products.
Both Indian and foreign manufacturers must follow the process to obtain BIS certification:
BIS Certification Process for Indian Manufacturers
BIS Certification Process for Foreign Manufacturers
Checklist Points for Obtaining ISI Mark on Room Heaters
The list of things you must remember for obtaining ISI Mark Certification without delays or rejection:
- Confirm that your product complies with safety regulations established by IS 302 (Part 2/Sec 30).
- Apply online through the Bureau of Indian Standards portal (Manakonline) with complete product information, including all technical specifications.
- Provide a valid business license and details about your manufacturing facility.
- Prepare a factory layout and manufacturing process diagram.
- Have an in-house lab for testing products according to BIS standards.
- Test the product with a laboratory accredited by BIS.
- All testing equipment must be calibrated.
- A representative in India (Authorized Indian Representative - AIR) must be appointed if you are a foreign manufacturer.
BIS Certification Fees in India for IS 302 (Part 2/Sec 30)
Go through the table to know the cost of BIS Certification India for IS 302 (Part 2/Sec 30):
|
S No. |
Particular |
Amount (INR) |
Remarks |
|
1. |
Application Fee |
1000 |
To be paid directly to BIS |
|
2. |
Audit Fee |
7000 |
To be paid directly to BIS |
|
3. |
License Fee |
1000 |
To be paid directly to BIS |
|
4. |
Sample Testing Fee |
As Applicable |
To be paid directly to BIS (Testing charges vary from product to product and lab to lab.) |
|
5. |
Minimum Advance Marking Fee |
As per the actual |
To be paid directly to BIS (Marking fee varies as per Indian Standard) |
|
6. |
Renewal Fee |
1000 |
To be paid directly to BIS |
|
7. |
Inclusion Fee |
5000 |
To be paid directly to BIS |
|
8. |
ERCS Pvt Ltd Service Fee |
Please contact info@elitasrcs.com |
|
|
Remarks |
Including all the taxes |
||
Why Choose ERCS Private Limited for BIS Licensing of Room Heaters?
ERCS Private Limited, as a top BIS Consultant, offers complete, end-to-end services for obtaining a Bureau of Indian Standards (BIS) certification for electrical room heaters (as per IS 302-2-30)
- ERCS Private Limited specializes in obtaining BIS certification for electrical products (with a primary focus on room heaters) with an emphasis on conforming to IS 302 (part 2/30).
- Involved with the entire certification lifecycle (i.e., documentation, coordinating with testing laboratories, and liaising with BIS personnel) to ensure that all aspects of a room heater conform to the BIS standard(s).
- To meet their mission and objectives, we have 20 qualified engineers, all of whom have significant industry experience and extensive knowledge of both electrical products and BIS requirements.
- ERCS assists its clients from the beginning of the certification process until the end (i.e., from the initial documentation submittal until BIS approval is granted).