BIS Certification for Hot-Dip Zinc-Aluminium-Magnesium Alloy-Coated Steel Sheets, Plates, And Strips IS 18513: 2023

As a product manufacturer, it is essential for you to obtain BIS certification for Hot-Dip Zinc-Aluminium-Magnesium Alloy-Coated Steel Sheets, Plates, and Strips as per IS 18513: 2023. Without a BIS certificate, it's difficult to beat the competition in the Indian market. Consumers need assurance regarding the quality, safety, and reliability of the products they purchase. The ISI mark helps your customers know that the product meets Indian standards.

 

To enhance your production and sales, obtaining a BIS license is essential. The BIS (Bureau of Indian Standards) issues the BIS certificate, for which manufacturers can apply either on their own or with the assistance of a BIS Consultant in India. Here, we will discuss how a BIS consultant helps you to obtain this in a hassle-free manner. There are lots of benefits of obtaining ISI Mark Certification in India for your products. Let’s start to take a closer look.

 

Overview Of BIS Certification for IS 18513: 2023 (Alloy-Coated Steel Sheets, Plates, And Strips)

Indian Standard - IS 18513: 2023 specifies the manufacturing, chemical, and physical requirements and testing of Hot-Dip Zinc-Aluminium-Magnesium Alloy Coated Steel Sheets, Plates, and Strips. Here’s the list of parameters or characteristics, let’s clarify:

 (i)            Surface Finish

(ii)          Chemical Composition

(iii)        Plastic Strain Ratio

(iv)        Bake Hardening Index

(v)         Coating Mass

(vi)         Product Analysis

(vii)      Mechanical Properties

(viii)    Coating Adherence

(ix)       Dimension

(x)         Shape

(xi)       Tolerance            

 

“Licence is granted to use Standard Mark on Hot-Dip Zinc-Aluminium-Magnesium Alloy Coated Steel Sheets, Plates and Strips as per IS 18513: 2023”.

 Type and Designation ofSubstrate (Steel Grade)         Coating Mass Designation   Surface Treatment Designation |  Classified as given in Table 1 for coated steels withcold rolled substrate and Table 2 for coated steelswith hot-rolled substrate.e.g.IZMCCR0, IZMC300S …. (Cold Rolled Substrate)IZMHHR1, IZMHHR2 …….(Hot Rolled Substrate) Classified as per Table 3e.g.ZM060, ZM070, ZM080 ….. C/P/O/CO/S/U/other (to be specified)

 

 BIS Certification Process for Hot-Dip Zinc-Aluminium-Magnesium Alloy-Coated Steel Sheets

Know the process to get BIS certification as per IS 18513. Here’s the list that will help manufacturers who want to apply for a BIS Certificate.  Manufacturers can follow the below steps:

• Product Identification: Visit BIS official website and go to the list of BIS mandatory products.
• Select the relevant Indian Standard (IS): To Clarify the appropriate IS standard for your products
• Manufacturer Registration: Submit your manufacturing Unit details to BIS like the firm’s name, address, and product information.
• Application for certification: Submit necessary documents including product information, manufacturing process, and test report, if applicable.
• Testing: Submit a Testing sample of the product to a BIS-approved laboratory
• You have two options for testing: Testing can be conducted in-house (if you have a BIS-recognized lab) or at an external BIS-recognized facility. Alternatively, testing can be done at a BIS laboratory.
•  Inspection and Audit: BIS may inspect and audit your manufacturing facility to verify compliance with quality control procedures.
• Certification Grant: BIS will certify your product only if it meets the IS standards criteria.
• Surveillance: BIS conducts regular surveillance to ensure continued compliance.
• Renewal: Certification is valid for a specified period, usually one to five years. Apply for renewal before your certification expires.

 

What is the Timeline of BIS Certification for Hot-Dip Zinc-Aluminium-Magnesium Alloy?

After applying for BIS certification, it is important to know the timelines for obtaining certification for your products. Below is a list of the timelines. Let's take a look:

• BIS certification for Indian Manufacturers (Standard Timeframe – 30 days)
• BIS certification for Foreign Manufacturers FMCS (Standard Timeframe – 180 days)

 

What are the Requirements for obtaining BIS product certification as per IS 18513?

Requirements to get the BIS license for Hot-Dip Zinc-Aluminium-Magnesium Alloy Coated Steel Sheets, Plates, and Strips

• Conformity of Raw Material as per IS 18513: 2023
• In-house testing laboratory for mandatory tests
• Competent Quality Control Personnel

 

Adherence to the BIS guidelines for Hot-Dip Zinc-Aluminium-Magnesium Alloy Coated Steel Sheets, Plates, and Strips as per Indian standard IS 18513: 2023. There are 3 major categories of documents required to get the BIS license:

•  Administrative Details
• Technical Details
• Quality Control Personnel Details  

 

 BIS Certification Cost for Hot-Dip Zinc-Aluminium-Magnesium Alloy-Coated Steel Products

The expenses involved in obtaining a BIS certificate, including the total fee details for IS number 18513: 2023, will need to be paid under the Product Certification (Scheme-I) of BIS

S No.	Particular	Amount (INR)	Remarks
1.	Application Fee	1000	To be paid directly to BIS
2.	Audit Fee	7000	To be paid directly to BIS
3.	License Fee	1000	To be paid directly to BIS
4.	Sample Testing Fee	As Applicable	To be paid directly to BIS (Testing charges vary from product to product and lab to lab.)
5.	Minimum Advance Marking Fee	As per actual	To be paid directly to BIS (Marking fee varies as per Indian Standard)
6.	Renewal Fee	1000	To be paid directly to BIS
7.	Inclusion Fee	5000	To be paid directly to BIS
8.	ERCS Pvt Ltd Service Fee	Please contact info@elitasrcs.com

 

In the BIS certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards. For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories. 

 

Apart from the charges mentioned above in the table, we may ask you to pay/reimburse for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

 

BIS Certification Benefits for Hot-Dip Zinc-Aluminium-Magnesium Alloy Coated Steel Products

Benefits of getting ISI Mark for Hot-Dip Zinc-Aluminium-Magnesium Alloy Coated Steel Sheets, Plates, and Strips to sell in the Indian Market with our help:

• The term “ISI mark" means that a certain product conforms to the quality standards set up by the government.

 

• Hot-dip zinc-aluminum-magnesium Alloy Coated Steel Sheets, Plates, and Strips must obtain the ISI Mark, and the violators are penalized with the material seized and a significant sum as a fine.

 

• Getting certification improves the probability of your product to survive and compete in the market.

 

• Customers tend to buy ISI-certified products as they ensure safety and standard quality. Hence, with certified products, you can win the confidence and trust of the buyer.

 

• With the word of mouth of such a client list, you can establish your credibility in the market.

 

• Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.

 

Role of ERCS Private Limited in getting your product certified :

• To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product follows the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
• ERCS Private Limited will be your friend, philosopher, and guide in the whole process of getting your product certified by the concerned authorities/ departments.

 

Scope of work by ERCS Private Limited:

 

• Ensuring the conformity of your product as per IS 18513 : 2023:

ERCS Pvt. Ltd. has developed a vast network within the Cement Industry & various BIS departments to assist in ensuring conformity of the product Hot-Dip Zinc-Aluminium-Magnesium Alloy Coated Steel Sheets, Plates and Strips according to according to IS 18513: 2023.

 

• Effective documentation with the awareness of the BIS guidelines:

To facilitate the industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 100 projects and various acquaintances in the Industry.

 

We understand the Indian Standard Specifications & BIS guidelines which we interpret to the Quality Control Personnel so we can do a reliable and effective documentation of your product by the BIS guidelines.

 

• A pre-visit can paid for at your factory premises:

In the process of getting BIS certification, the officer from the BIS authority visits the factory for inspection. To get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted to remove the elements of fallibility.

 

• Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.

 

Similar Mandatory Products for BIS Certification are as below:

• BIS certification for Hot Dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement - IS 12594 
• BIS Certification for Hot Dip Aluminium- Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) -  IS 15961
• BIS certification for Hot-Dip Galvanized/ Galvannealed Steel Sheet And Strips For Automotive Applications - IS 18385
• BIS certification for Hot Dip Galvanized Stay Strand - IS 2141
• BIS certification for Hot-Dip Terne Coated Carbon Steel Sheets - IS 12313