BIS Certification for Heat Treated Steels Alloy and Free Cutting Steels for Ball and Roller Bearing Steels IS 17111

Are you a manufacturer looking for a BIS certification scheme for products like treated steel alloys and Cutting Steel which are usually used for ball and roller-bearing steels? It is important to note that a BIS license plays a major role in the markets of India while establishing trust among consumers. Not only does it emphasize the reliability and safety of the goods but also it makes clear that the product adheres to Indian regulatory compliances. This certification imprints the credibility and quality assurance that customers seek. Eventually, this promotes the marketability of the manufactured goods in the country and opens the gateway to new business opportunities.

 

The latest QCO (Quality Control Order) issued by the Ministry of Steel (India) stated that every steel and steel product mentioned by it should provide a Test Certificate showing the BIS Standard Mark for shipments. Steel products found substandard or defective should be disposed of as scrap in compliance with regulations. This process should not pose environmental hazards, violate any laws, and ensure that safety issues at the time of disposal are in line with the standards that apply. Any person who contravenes any of the provisions of this Order shall be punishable under section 29 of the Bureau of Indian Standards Act, 2016 (11 of 2016).

 

Overview: Heat Treated Steels, Alloy and Free Cutting Steels for Ball and Roller Bearing Steels  

The IS 17111 (Indian Standard) covers products like cutting steel and alloys that are treated by Heat. It also specifies the manufacturing, chemical, and physical requirements and testing of the same. Below are the different parameters on which it is determined whether the product complies with the IS 17111 or not. Let us take a look:

(i)          Chemical Composition 

(ii)         Hardenability 

(iii)        Hardness 

(iv)        Micro Structure 

(v)         Degree of Spheronization 

(vi)        Distribution of Carbides 

(vii)       Non Metallic Inclusions 

(viii)      Macroscopic Inclusions 

(ix)        Internal Soundness  

(x)         Surface Quality 

(xi)        Decarburization test 

(xii)       Dimension and Tolerances

 

License is granted to use Standard Mark on Heat-Processed Alloys and Easy-cutting steels with an IS 17111

• Name of the product: Ball and Roller Bearing Steels IS 17111 - Specification
• Product Identification: Visit the BIS official website and go to the list of BIS mandatory products

 

BIS Certificate Process for Ball and Roller Bearing Steels

Getting BIS certification for steel is difficult if you don't know the process. Here we have mentions Procedure to get BIS Certification for Heat Processed Steel Alloys and High-Performance Cutting Steels in simple steps. Check below:

• Identification of the Product: To see a list of products that need certification, go to the BIS certification website.
• Decide which Indian Standard (IS) is applicable: Choose the IS standard that applies to your required product.
• Registration of Manufacturers: Provide your production unit to BIS with the necessary information, including the name, address, and product specifics of the company.
• Certification application: Provide the required paperwork, such as product details, production procedures, quality control methods, and test reports (if applicable), in order to apply for BIS certification.
• Testing: Send samples to a lab that has been approved by BIS for analysis. 
• Inspection and Audit: In order to confirm adherence to quality control protocols, BIS may conduct an inspection and audit of your production site.
• Certification Grant: If your product satisfies the requirements of the IS standards, BIS will certify it.
• Surveillance: To guarantee ongoing compliance, BIS regularly carries out surveillance.
• Renewal: Certification is good for a set amount of time, typically one to five years. Before your certification expires, submit a renewal application.

 

Timeline for BIS Certification for Indian Standard 17111

• For Indian Manufacturers (Standard Timeframe – 30 days)
• For Foreign Manufacturers (Standard Timeframe – 180 days)

 

What are the requirements to get the BIS license for IS 17111?

• Conformity of Raw Material as per IS 17111·        
• In-house testing laboratory for mandatory tests
•  Competent Quality Control Personnel
• Adherence to the BIS guidelines as per Indian standard IS 17111

 

There are some major categories of documents required to get the BIS license, they are:

a. Administrative Details

b.   Technical Details

c.  Quality Control Personnel Details

d.   Commercial Details

 

BIS certification cost for the Products: Under Scheme I

COST FOR BIS REGISTRATION / ELECTRONICS PRODUCTS (Government Costs)
Type of Fee	New Application	Renewal	Inclusion
Application Fee	1000	1000	1000
Processing Fee*	25,000x2 = 50,000	25,000x2 = 50,000	15,000x2= 30,000
Registration Fee*	1000 x 2 = 2000	1000 x 2 = 2000	1000 x 2 = 2000
Total	53,000	53,000	30,000
Note* 1. The processing fee and registration fee need to be paid within 2 years, as registration numbers will be granted initially for two years. 2. The cost of BIS registration will depend on the following factors: · Location and Name of the Manufacturing Process (Overseas/ Domestic) · Types of Products and model quantity · Testing fee for the products · Govt. Fee (BIS) and ERCS Service fee

• In the BIS certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards. For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
• Apart from the charges mentioned above in the table, we may ask you to pay/reimburse for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its certification.

 

Benefits for ISI Mark on  Heat Processed Steel Alloys and High-Performance Cutting Steels

• When a product bears the "ISI mark," it indicates that it satisfies government-established quality standards.
• Products must have the ISI Mark, and those who fail to do so face material confiscation and hefty fines.
• Obtaining certification increases the likelihood that your product will endure and compete in the marketplace.
• Because ISI-certified products guarantee safety and standard quality, customers are more likely to purchase them. Therefore, you can gain the buyer's faith and trust by offering certified products.
• You can build your reputation in the industry by relying on the recommendations of this clientele.
• As a result, you may compare the product's market value and raise the bar with the well-known brand.

 

Role of ERCS Private Limited in getting your product certified :

• To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product follows the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
•  ERCS Private Limited will be your friend, philosopher, and guide in the whole process of getting your product certified by the concerned authorities/ departments.

 

Scope of work by ECRS Private Limited :

a.       Ensuring the conformity of your product as per IS 17111 :

ERCS Pvt. Ltd. has developed a vast network within the Cement Industry & various BIS departments to assist in ensuring conformity of the product according to Indian Standard 17111.

 

b.      Effective documentation with the awareness of the BIS guidelines:

To facilitate the industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 100 projects and has various acquaintances in the industry.

 

We understand the Indian Standard Specifications & BIS guidelines which we interpret to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

 

 c.       A pre-visit can paid for at your factory premises:

In the process of getting BIS certification, the officer from the BIS authority visits the factory for inspection. The BIS inspection should go smoothly without any Non-Conformity to get good results. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted to remove the elements of fallibility.

 

d.      Assistance for BIS audits:

We will explain the whole procedure for conducting a BIS inspection and inform you of what needs to be prepared and readily available at the time of inspection.

Similar mandatory products for BIS certification are as follows:

• BIS Certification for Wear Abrasion Resistant Steel and Plates - IS 18809
• BIS Certification for Shell Bodies and Proof Shots - IS 14698
• BIS Certificate for Hot - Rolled Mild Steel Sheet and Strip in Coil Form - IS 2385
• BIS Certification for Steel Pipes For Water And Sewage - IS 3589
• BIS certification for Hollow Steel Sections For Structural Use - IS 4923