BIS Certification for Electric Iron IS 302 Part-2

Planning to manufacture or import electronic irons in India? Then securing BIS Certification for Electric Iron (IS 302 Part-2 Section-3) is the first and most crucial step for the legal Indian market. The ISI Mark is mandatory under the BIS Act, 2016, to ensure safety for dry, steam, and cordless irons with rated voltage not exceeding 250 V.  As per the Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality control) order, all the manufacturers of safety household and similar electrical appliances – Electric irons are obligated to obtain ISI Mark Certification. BIS Certification ensures that the electric iron has been tested for various parameters, including insulation, thermal management, voltage handling, and overall construction. This certification applies to appliances not intended for household use.

Overview of Electric Iron IS 302-2-3

An electric iron is an essential household electrical device used for removing wrinkles from fabrics. It comprises a metal, triangular, flat soleplate, usually made of metal, heated internally by a nichrome wire. Modern electric irons have thermostatic controls and non-stick coatings. They have varying powers, ranging from 300W to 1000W, including those used with steam. BIS certification is mandatory for electric irons in India. It is required to ensure safety from electric shock, overheating, and fire. It must comply with IS 302 (Part 2/Sec 3):2007, which includes dry and steam irons, and must have the ISI mark before being sold.

Key Highlights for IS IS 302-2-3

Below, you can refer to the specifications under the IS 302-2-3 for BIS Certification of Electric Iron:

• Scope: It covers safety requirements for mains-operated, battery-operated, and combined power electric fence energizers, and the rated voltage should not exceed 250V.  
• Mandatory Certification: As per the “Electric Iron (Quality Control) Order, 2024,” BIS certification under the “ISI Mark” is compulsory for selling or importing electric fence energizers in India.  
• Implementation Dates: This order will come into effect on the “14th of May, 2025.”  
• Protection Against Shock: It ensures the safe operation of the energizer, protecting humans and animals from hazardous electric shocks.  
• Output Limits: It has stringent output limits on the voltage and energy pulses, making them effective and safe.

Benefits of BIS/ISI Certification for Electric Iron

The advantages of BIS certification for Electric Iron, which is mandatory for the sale and distribution of the product in India, can be listed as:

• Compliance with Indian Safety Standards.
• Mandates for approval for the legal sale and distribution of the product in India.
• Increases credibility for the product.
• Increases trust for the product among consumers.
• Verifies electrical safety.
• Verifies the reliability of performance.
• Reduces risks of fines, confiscation of the product, and legal issues.
• Increases the reputation of the brand for government tenders.
• Helps clear customs for imported Electric Fence Energizers.

Documents Required for Obtaining ISI Mark on IS 302-2-3

Here is the List of Documents Required for BIS Certification of Electric Iron (under IS 302 / IS 302-2-3 as applicable):

• Application form (duly filled and signed)
• Business registration certificate (GST Certificate / Incorporation Certificate)
• Manufacturing unit address proof
• Factory layout and manufacturing process flow chart
• List of manufacturing machinery and testing equipment
• Calibration certificates of testing equipment
• Product technical specification sheet
• Product drawings and circuit diagram
• Authorized Indian Representative (AIR) documents (for foreign manufacturers)
• Trademark authorization letter (if applicable)

Applicable Test Parameters for Electric Iron IS 302-2-3

Essential parameters of the test as per IS 302-2-3, which is equivalent to IEC 60335-2-76, are as follows:

• Marking & Rating Verification: Check the voltage, wattage, model number, ISI mark spacing, and safety instructions on the iron.
• Input Power Test: Test the wattage consumption at rated voltage.
• Heating (Temperature Rise) Test: Check the surface temperature of the soleplate and accessible parts.
• Thermostat Operation Test: Check the thermostat mechanism.
• Leakage Current Test: Check the leakage current within safety limits.
• Insulation Resistance Test: Check the insulation resistance between live parts and accessible metal parts.
• Electric Strength (High Voltage) Test: Apply high voltage.

Process of BIS Certification of IS 302-2-3

To get the BIS certification for your product, please follow the procedure given below: 

• Filling of the Application: First, the manufacturer must register on the BIS Portal. After registration, the manufacturer must apply for the license by filling out the application. 
• Documentation Preparation: This includes obtaining the required documents, including the licenses of the factory, quality control, specifications of the raw materials, etc. 
• Laboratory Testing: Samples of the product must be sent to a laboratory registered with the BIS for chemical composition tests. 
• Inspection of Factory: The BIS officers inspect the extraction process, quality control, and factory layout. 
• Questioning the License: After the completion of the inspection, examination, and verification of the test reports, the BIS grants the license to use the "Standard Mark".

The process can be obtained and certified for the Indian manufacturer and the foreign manufacturers as well: 

BIS ISI Certification Process for Indian Manufacturers

BIS FMCS Certification Process for Foreign Manufacturers

Checklist of Points for Obtaining ISI Mark on Electric Iron

Important Points to Remember for BIS Certification of Electric Iron in India:

• The electric iron should be fully compliant with IS 302-2-3 safety and performance requirements before applying for BIS Certification.
• The manufacturer should establish mandatory in-house testing facilities as per BIS requirements for obtaining ISI Mark Certification.
• The product should be tested from a BIS-recognized lab for safety as per Indian safety standards.
• The testing equipment should be calibrated and possess a valid NABL calibration certificate.
• The manufacturer should develop and execute a Quality Control Plan as per BIS requirements.
• The product should be correctly marked with the voltage rating of 230V/50Hz, wattage rating, and ISI mark details.

BIS Certification Fees in India for IS 302-2-3

Go through the table to know the cost of BIS Certification India for IS 302-2-3:

Why Choose ERCS Private Limited for BIS Certification of Electric Iron?

ERCS Private Limited has been delivering professional services for BIS certification and compliance since 2019. With over 1500+ successful certification projects under their belt, ERCS has the practical knowledge to handle the BIS process for the electrical industry efficiently. ERCS has extensive experience working with various industries and products, which has enabled them to gain valuable insights into the Indian Standards and the procedures involved with the assessment of conformity. With the support of experienced consultants, ERCS ensures a smooth journey for the client.